Summary

This template will hold 15 10mm wide Bamboo Pens and allow you to engrave the pen clip and the top side of the pen. 

You can also engrave the sides of the pens as well but will only be able to hold 8 pens instead of 15.

This is a multipart template but you are not required to use the base plate if you choose not to as it will use another piece of material.

Size of this template is 203.2mm X 203.2mm or 8" x 8" and was constructed with 3mm Basswood.

The assembly of the template is held together with CA glue.

Pens that I used were from Amazon